Teflon high-temperature cloth The production workshop shall be cleaned regularly
During the production of Teflon high-temperature cloth, there will be a large number of waste materials. Therefore, we should actively deal with waste materials while producing high-temperature cloth, which can not only reduce production costs, because these waste materials can be recycled into raw materials for future high-temperature cloth production, but also reduce environmental pollution. The high-temperature cloth is very poor in decomposability and insoluble in water The corrosivity of acid and alkali solutions to soil is even less, and the damage to the environment is even more than ten times higher than that of plastic. This crisis can be solved by crushing the high-temperature cloth.
When the high temperature cloth is crushed, it is easy to splash out a large amount of glass fiber dust. Glass fiber is a very small fiber, which is a fraction thinner than human pores, so it can pass through human hairs and enter human blood. This kind of harm is very great. If human beings are in this environment for a long time, it will seriously affect human health.
Therefore, the Teflon high-temperature cloth crushing workshop must have strict protection measures to reduce the harm of glass fiber dust in the air to the human body.
1、 All staff must wear protective work clothes, helmets and sunglasses to ensure the full closure of the human body, and wear protective gloves when working.
2、 Ensure the ventilation of the workshop to reduce the concentration of glass fiber dust in the workshop.
3、 It is necessary to ensure the air humidity in the Teflon high-temperature cloth crushing workshop, so that the concentration can be reduced to a lower level.
4、 The working time of the staff in the Teflon high-temperature cloth crushing workshop shall not exceed eight hours, and they cannot work continuously. For example, if you work in the Teflon high-temperature cloth crushing workshop today, you can't work in this workshop again within 15 days to prevent the accumulation of glass fiber dust in the human body. You need to change another group of workers to crush.
5、 The Teflon high-temperature cloth crushing workshop should be far away from the densely populated area and preferably built in the field. A separate workshop should be set up to crush the Teflon high-temperature cloth. If conditions do not permit, it should also be set up in the area where people do not often walk in the factory. Teflon high-temperature cloth production workshop shall be regularly cleaned once every seven days.
