Teflon conveyor belt also called Teflon conveyor belt , Teflon Conveyor belt 、 PTFE conveyor belt and High temperature conveyor belt , Teflon conveyor belt Teflon mesh conveyor belt And Teflon high-temperature cloth, both of which use glass fiber cloth as the base material to coat Teflon resin to make Teflon (PTFE) conveyor belt base cloth; The specifications of Teflon grid conveyor belt are defined by the mesh size, which mainly includes 1 × 1MM, 2 × 2.5MM, 4 × 4MM, 10 × 10MM and other meshes, and can be divided into single weft and double weft Teflon grid conveyor belts according to the different warp and weft lines; Teflon high-temperature cloth is differentiated by thickness, with the thinnest up to 0.08MM.
characteristic
1. It is used between low temperature - 70 ℃ and high temperature 260 ℃, with weather resistance and aging resistance. After practical application, if it is kept at 250 ℃ for 200 days, not only the strength will not be reduced, but also the weight will not be reduced; After 120 hours at 350 ℃, the weight is only reduced by about 0.6%; The original softness can be maintained at - 180 ℃.
2. Teflon conveyor belt non adhesion: not easy to adhere to any substance. Easy to clean all kinds of oil stains, stains or other attachments attached to its surface; Almost all adhesive substances such as paste, resin and paint can be simply removed;
3. It is resistant to chemical corrosion, strong acid, alkali, aqua regia and various organic solvents.
4. Teflon conveyor belt has good dimensional stability (elongation coefficient less than 5 ‰) and high strength. It has good mechanical characteristics.
5. Anti bending fatigue, can be used for small wheel diameter.
6. Drug resistance, non-toxic. It is resistant to almost all medicaments.
7. Fireproof and flame retardant.
8. Air permeability --- air permeability of conveyor belt, reduce heat source consumption and improve drying efficiency.
Scope of application
1. Anti sticking lining, gasket, cloth and conveyor belt; According to different thickness, it is used for conveyor belt, adhesive belt, sealing belt, etc. of various drying machines.
2. Welding cloth for welding and sealing plastic products; Plastic sheet, film, heat sealing and pressing strip lining.
3. High electrical insulation: electrical insulation tape base, spacer, gasket, lining ring. High frequency copper clad plate.
4. Heat resistant cladding; Laminated base material, wrapped with insulation body.
5. Microwave gasket, oven piece, food drying;
6. Adhesive tape, transfer printing hot tablecloth, carpet back adhesive curing conveyor belt, rubber vulcanization conveyor belt, abrasive plate curing release cloth, etc.
7. Pressure sensitive tape base cloth.
8. Building membrane materials: roof awnings of various sports venues, station pavilions, parasols, landscape awnings, etc.
9. It is used for anti-corrosion coating of various petrochemical pipelines, environmental protection desulfurization of waste gas from power plants, etc.
10. Flexible compensator, friction material, grinding wheel slice.
11. "Anti static cloth" can be made after special processing.
Teflon mesh conveyor belt has the characteristics of easy breathable mesh, so it is widely used in textile printing and dyeing, printing drying guide belt, screen printing, UV drying UV series, light curing machine, offset printing machine, loose drying machine, non-woven drying machine, high frequency drying machine, food baking machine guide belt, temperature controlled drying room, rapid drying of flux based ink and drying of general moisture content items and other equipment.
Teflon high temperature cloth has the characteristics of high temperature resistance, low friction coefficient and good insulation, and is widely used in adhesive machines, clothing printing and dyeing machines.
Connector
The joint mode of Teflon grid conveyor belt is mainly soft joint (bull nose joint) and steel buckle joint
Various joint modes of Teflon high-temperature cloth, such as butt joint, lap joint
Thin lap joint, steel buckle joint, etc.
Hemming style
Teflon turning film edging, Kevlar cloth edging, Teflon cloth edging, etc
Mesh belt supplement: due to the difference of equipment width, it is recommended to use double weft for ultra wide mesh belt.
Method Editing for Prolonging the Service Time of Teflon Conveyor Belt
1： Claw pulley at any concave transition of Teflon conveyor belt. The practice has proved that the transverse strength of the steel rope conveyor belt is insufficient. When starting, the belt pulley causes excessive force on the conveyor belt, leading to tearing of the conveyor belt. The problem can be completely solved by changing the umbrella part of the belt pulley to the belt pulley.
Second: improve the industrial conveyor hopper. Improving the industrial conveyor hopper is one of the effective measures to prevent the early damage of the conveyor belt. The dropping hopper at the transfer of each belt conveyor is improved to increase its ability to pass foreign matters by 2.5 times. Long and large foreign matters are not easy to be stuck between the funnel wall and the conveyor belt during the conveying process, reducing the probability of foreign matters tearing the conveyor belt. The guide apron at the hopper makes the gap between it and the conveyor belt larger and larger along the running direction of the conveyor belt, solving the problem of coal blocks and gift blocks stuck between the conveyor belt and the speech board, and eliminating the conveyor belt damage caused thereby. For the hopper with large drop, the buffer baffle is installed inside to avoid the direct impact of materials on the conveyor belt.
The detailed specifications can be customized, please contact customer service or call for consultation.
