High temperature resistant conveyor belt manufacturer Talk about it Teflon conveyor belt Repair and maintenance
one Conveyor belt The interface is broken. If this happens to the conveyor belt that has just been replaced, generally the conveyor belt that has just been glued will tighten the drum before it is completely fixed. It is recommended that the conveyor belt that has been glued should not be adjusted too tightly in a short time, because the ultrahigh load will cause disconnection at the interface. Treatment method, please re glue the conveyor belt company.
2. The conveyor belt deviates. First, check whether the rollers are at the same level, and then check whether there is deviation at the interface of the conveyor belt. If the belt deviation is not serious, the conveyor belt deviation can be prevented by welding iron blocks on both sides of the rack. If the conveyor belt deviation is serious and the conveyor belt itself is not straight, the conveyor belt company can be asked to install a new conveyor belt.
3. The conveyor belt slips. This may also be because the drum is too old and the friction coefficient is too low. It is recommended to replace the drum or wrap the drum. This is to fix the conveyor belt to the surface of the drum, which not only increases the friction coefficient, protects the drum and conveyor belt, extends the service life of the drum and conveyor belt, but also ensures the stability of production, and even improves production efficiency.
4. The surface of the conveyor belt is excessively worn, so it is recommended to replace it with a new one. Before replacing the conveyor belt, it is recommended to loosen the drum first, and then remove the conveyor belt. Do not force the conveyor belt off, so as to reduce the chance of machine damage.
