Teflon high temperature tape Storage, transportation, use and maintenance
1. The tape shall be stored in the warehouse to avoid sunshine and rain; It is forbidden to contact with acid, alkali, oil and organic solvents. Keep it clean and dry. The room temperature is between - 15 ℃ and 40 ℃ 1 m away from the device.
2. The tape shall be placed in rolls without folding. If it is stored for too long, it shall be turned over once a quarter. Teflon conveyor belt
3. Loading and unloading Conveyor belt It is better to use a crane, and use a sling with a beam to lift it steadily to avoid damaging the belt edge. Do not load and unload arbitrarily, which may cause loose roll and sling.
4. The type and specification of adhesive tape shall be selected reasonably according to the use needs and specific conditions.
5. It is not allowed to connect (assemble) tapes of different varieties, specifications, models, strengths, and cloth layers together for use.
6. The conveyor belt joint is preferably connected with hot vulcanized rubber to improve reliability and maintain high effective strength.
7. The diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt shall comply with relevant regulations.
8. Do not allow the tape to snake or creep. Keep the trailing roller, vertical roller flexible and the tension moderate.
9. When the conveyor is equipped with baffle and cleaning device, wear of the belt shall be avoided.
10. Cleanliness is the basic condition for good operation of the tape, and foreign substances may affect belt eccentricity, tension difference, or even fracture. Teflon conveyor belt
11. If the tape is found to be damaged at an early stage during use, the cause shall be found and repaired in time to avoid adverse consequences.
