Special Teflon conveyor belt With the characteristics of high temperature resistance, small surface friction coefficient and good insulation, it is widely used in adhesive machines, clothing printing and dyeing machines. Except for molten alkali metal, PTFE in the Tetrafluoroethylene Product Center is almost free from corrosion of any chemical reagent. It is used between low temperature - 70 ℃ and high temperature 260 ℃, with weather resistance and aging resistance. Teflon mesh belt The service life has been applied in practice. If it is kept for 200 days at 250 ℃, not only the strength will not be reduced, but also the weight will not be reduced. Non adhesion: It is not easy to adhere to any substance. Easy to clean all kinds of oil stains, stains or other attachments attached to its surface; Almost all adhesive substances such as paste, resin and paint can be simply removed.
Teflon mesh belt The damage mainly includes mesh surface wear, edging wear, joint damage, mesh belt elongation, Teflon coating falling off, etc. The most serious ones are mesh surface damage, joint damage, edging wear. The polytetrafluoroethylene film has the characteristics of high temperature resistance, and its friction coefficient is extremely low, so it can be used for lubrication and also become an ideal coating for easy cleaning the inner layer of water pipes. As long as the edging wear is caused by the mesh belt deviation, the service life of the Teflon mesh belt Once the mesh belt deviates, it is easy to cause severe friction between the edging and the baffles on both sides of the conveyor equipment, thus causing damage to the mesh belt edging. Therefore, once the mesh belt deviates during use, it should be corrected in time.
