-
The manufacturer of high-temperature resistant conveyor belt talks about the repair and maintenance of Teflon conveyor belt 1. The interface of conveyor belt is broken. If this happens to the conveyor belt that has just been replaced, generally the conveyor belt that has just been glued will tighten the drum before it is completely fixed. It is recommended that the conveyor belt that has been glued should not be adjusted too tightly in a short time, because the ultrahigh load will cause disconnection at the interface. Handling method, please
Published on: November 5, 2021-12 Number of hits: 127
-
Suzhou Tuoyang New Material Technology Co., Ltd., located in Guli Town, Changshu, Suzhou, is a manufacturer of a series of high temperature resistant products such as polytetrafluoroethylene and perfluoroethylene. The company has production equipment and R&D personnel with strong technical strength. The R&D team is centered on senior engineers engaged in film and film industry and personnel with rich manufacturing experience. The products are widely used in instruments
Published on: March 3, 2020 Number of hits: 62
-
Teflon conveyor belt explains how to repair the damaged conveyor belt. 1. The main reason for replacing the conveyor belt is wear, which is generally divided into the following three forms: 1) The wear at the vulcanization joint of the conveyor belt is usually due to the high wear resistance of the conveyor belt's own material compared with the rubber layer at the vulcanization joint or the quality problem of thermal vulcanization, Local grinding of vulcanized joint rubber layer
Published on: February 29, 2020 Clicks: 71
-
How to share the scar of heat-resistant conveyor belt? The appearance defects of the heat-resistant conveyor belt and their causes. The surface of the covered rubber is slightly concave, which is the most common appearance defect of the heat-resistant conveyor belt. The main causes are: the plastic property of the rubber is too small, which results in poor fluidity. If the combination of the covering rubber of ethylene propylene rubber is unreasonable, especially if the softener is used improperly, the plastic property of the rubber is small, and the fluidity is poor
Published on: February 22, 2020 Clicks: 53
-
Suzhou Tuoyang New Material Technology Co., Ltd. shares the causes and preventive measures of belt edge wear. The belt edge wear is mainly the friction wear between the belt edge and the rack when the belt is deflected. The conveyor belt should run on the center line of the idler group, but due to the defects caused by the manufacturing, installation and use of the conveyor, the conveyor belt often deviates from the center line. Usually, the conveyor belt
Release time: 2022-10-20 Number of hits: 60
-
The high temperature resistant conveyor belt manufacturer shall perform the lacing operation before using the conveyor belt, which can ensure the working efficiency and life extension of the conveyor belt. What are the ways in which the conveyor belt is tensioned? The following conveyor belt manufacturer will guide you to understand the tightening method and influencing factors of the conveyor belt in detail. 1、 What are the tensioning methods of conveyor belt? 1. Structure elongation, which is mainly caused by
Published on: February 21, 2020 Number of hits: 55
-
1、 Startup and shutdown: the conveyor shall be started under no-load condition generally. When several belt conveyors are installed in sequence, the lockable starting device shall be used to start and stop in a certain order through the central control room. In addition to Teflon conveyor belt, in order to prevent accidents, each conveyor should also be equipped with a local start or stop button, which can stop any one separately
Published on: February 21, 2020 Clicks: 71
-
Suzhou Tuoyang New Material Technology Co., Ltd. shares the following factors that may occur in the aging of conveyor belt: 1. Oxygen: oxygen reacts with rubber molecules in free radical chain reaction, and the molecular chain cracks or excessively crosslinks, causing changes in rubber properties. Oxidation effect is one of the important reasons for rubber aging. The chemical activity of ozone and ozone is much higher than that of oxygen, which is more damaging
Published on: February 20, 2020 Number of hits: 45
-
The requirements of conveyor belt production on the framework materials are quite specific. The canvas framework materials of conveyor belts with different properties have special requirements, and can not be mixed, otherwise it will cause various problems of the conveyor belt. The bending degree of the skeleton material determines the tension degree of the canvas, so we should pay special attention to it. Here we go
Published on: February 19, 2020 Clicks: 57
-
The following points should be paid attention to when using Teflon conveyor belt for transportation and storage: 1. Teflon conveyor belt should be kept clean during transportation and storage, avoid direct sunlight, rain and snow, prevent contact with acid, alkali, oil, organic solution and other substances that affect the quality of rubber, and be 1 meter away from the heat source. 2. Warehouse during storage
Published on: February 19, 2020 Number of hits: 60
-
The use of conveyor belts has covered a wide range of areas, and conveyor belts can be seen wherever there is a conveyor. The conveyor belt has many advantages such as safe operation, simple use, saving manpower and material resources, which can reduce the project cost and create greater benefits. In fact, the maintenance of the conveyor belt is relatively simple, and the maintenance cost is not high, which is favored by the society. Because of its extensive transportation
Published on: February 18, 2020 Number of hits: 65
-
It is inevitable that the conveyor belt is damaged during use. How to repair the damaged conveyor belt? Grind the damaged part of the conveyor belt with an angle grinder and tungsten steel grinding disc. Select the corresponding conveyor belt patch or patch with semi vulcanized layer according to the size of the damaged part of the conveyor belt (the patch or patch shall be at least larger than the damaged part
Published on: February 18, 2020 Number of hits: 38
-
1 Oxygen: Oxygen reacts with rubber molecules in free radical chain reaction, and the molecular chains crack or cross link excessively, causing changes in rubber properties. Oxidation effect is one of the important reasons for rubber aging. 2 The chemical activity of ozone and ozone is much higher than that of oxygen, which is more damaging. It also opens the molecular chain
Published on: February 17, 2020 Number of hits: 46
-
Appearance defects and formation reasons of high-temperature resistant conveyor belt: the covered rubber surface is slightly concave, which is the most common appearance defect of high-temperature resistant conveyor belt. The main causes are: the plastic property of rubber material is too small, which leads to poor liquidity. If the matching combination of the covering rubber material of ethylene propylene rubber is unreasonable, especially the softener
Published on: February 17, 2020 Number of hits: 56
-
Teflon conveyor belt has the characteristics of high temperature resistance, small surface friction coefficient and good insulation, and is widely used in adhesive machines, clothing printing and dyeing machines. Except for molten alkali metal, PTFE in the Tetrafluoroethylene Product Center is almost free from corrosion of any chemical reagent. For low temperature - 70 ℃, high temperature 2
Published on: February 15, 2020 Number of hits: 80
-
How to repair Teflon conveyor belt to repair wear? Many people must not know. Under high-speed operation, the Teflon high-temperature cloth conveyor belt often produces severe friction, so it is common to have certain wear under long-term use. So how can we repair the wear? Let's have a look.
Published on: February 15, 2020 Number of hits: 108
-
Teflon seamless belt, also known as seamless bonding machine belt, is made of high-strength glass fiber yarn and Kevlar (aramid) warp knitting equipment to weave tubular fabric, and Teflon resin (PTFE) is coated with unique technology. Features of Teflon seamless belt: 1. Seamless
Published on: February 14, 2020 Clicks: 63
-
The production process of Teflon mesh belt: select high-quality glass fiber, use special knitting process for processing, then soak it, soak it, and then carry out various processes of coating. Teflon mesh belt with
Published on: February 14, 2020 Clicks: 199
-
Introduction to the cause of deviation of Teflon conveyor belt: deviation of conveyor belt is one of the most common faults when the belt conveyor is running. There are many reasons for deviation. The main reasons are low installation accuracy and poor daily maintenance. During installation, the head and tail rollers and the intermediate idler rollers shall be on the same centerline as far as possible and parallel to each other to ensure that the conveyor belt is not biased or slightly biased. In addition, the belt is connected
Published on: November 6, 2021-10 Clicks: 270
-
Suzhou Tuoyang New Material Co., Ltd. talks about the strength and speed of Teflon conveyor belt. First of all: 1. Conveying strength: the conveying strength of Teflon conveyor belt refers to the amount of materials transported per unit time. When transporting bulk materials, it is calculated by the mass or volume of materials transported per hour; When conveying into pieces, it is calculated by the number of pieces transported per hour. 2. Conveying speed: lift
Published on: October 17, 2019 Clicks: 144
-
The performance characteristics of Teflon film With the increasing demand for engineering plastics in China's industry, Teflon film has been widely used in the chemical industry due to its superior performance advantages. In brief, Teflon film is a vinyl polymer, which is obtained by addition polymerization of fluoroethylene. So what are the performance characteristics of Teflon film that have been favored by people? Here's for you
Published on: October 17, 2019 Clicks: 343
-
The polytetrafluoroethylene tape is the choice of polytetrafluoroethylene resin coated glass fiber yarn. The production of polytetrafluoroethylene glass fiber tape. When the glass fiber yarn contacts the human body, the skin will itch, but it will not bring any toxicity to the human body; High temperature silica gel will not cause harm to human body, only Teflon. The science of polytetrafluoroethylene is called polytetrafluoroethylene (Teflon), which has no effect on human body
Published on: September 24, 2019 Number of hits: 115
-
Teflon mesh belt is made of suspension polytetrafluoroethylene (commonly known as plastic king) emulsion as raw material, impregnated with high-performance glass fiber mesh. It is a new composite product with high energy and multipurpose. Because of its excellent properties, it is widely used in food manufacturing, environmental protection, printing and dyeing, packaging, chemical industry, glass, medicine, electronics, insulation, grinding wheel slicing, machinery and other fields/
Published on: September 18, 2019 Number of hits: 134
-
Do you know that the non stick pan must be used below 250 ℃? Do you know the danger if the temperature is higher than 250 ℃? On July 15, the head of the Standards Department of the Health Supervision Center of the Ministry of Health said in an interview with our reporter, "As early as 1989
Published on: August 30, 2019 Clicks: 312
-
Teflon tape, also called Teflon tape, Teflon adhesive tape, Teflon adhesive tape PTFE tape, etc., is made of imported glass fiber yarn coated with PTFE resin. Teflon tape has smooth surface, good adhesion resistance, chemical corrosion resistance, high temperature resistance, excellent insulation performance and high temperature resistance. At 250 ℃
Published on: November 6, 2021-10 Clicks: 218
-
Performance of Teflon high temperature tape: 1. It is used between low temperature - 70 ℃ and high temperature 230 ℃. 0.08mm thick; 0.13mm; 0.18; 0.25mm 2. It is resistant to ozone, oxygen, light and weather aging, and has excellent weather resistance for outdoor use, with a service life of up to 10 years 3. It has high insulation performance, dielectric constant of 3-3.2, and breakdown voltage of 20-50KV/
Published on: February 24, 2020 Number of hits: 58
-
What should we pay attention to in the production workshop of Teflon high-temperature cloth? During the production of Teflon high-temperature cloth, there will be a large number of waste materials. Therefore, we should actively deal with waste materials while producing high-temperature cloth, which can not only reduce production costs, because these waste materials can be recycled into raw materials for future high-temperature cloth production, but also reduce environmental pollution
Published on: March 31, 2018 Number of hits: 216
-
Teflon high-temperature tape is made of various base cloth woven with imported glass fiber, and then coated with imported polytetrafluoroethylene. It is a kind of adhesive tape processed by a special process. It is a new composite material adhesive tape with high performance and multi-purpose. Teflon high-temperature tape is widely used in papermaking, food, environmental protection, printing and dyeing, clothing, chemical industry, glass, medicine, electronics, insulation, grinding wheel slicing
Published on: March 31, 2018 Clicks: 233
-
Although there is no conclusion on whether the "Teflon high-temperature cloth" affects the rice cooker industry and whether Teflon is toxic, the debate has spread to other fields other than non stick cookers, such as small household appliances. An insider told the reporter that many large domestic rice cooker manufacturers have begun to seek new materials for making rice cooker liners. Because the rice cooker industry does not rely on "Teflon"
Published on: March 31, 2018 Clicks: 203
-
Storage, transportation, use and maintenance of Teflon high-temperature adhesive tape 1. The adhesive tape should be stored in the warehouse to avoid sun and rain; It is forbidden to contact with acid, alkali, oil and organic solvents. Keep it clean and dry. The room temperature is between - 15 ℃ and 40 ℃ 1 m away from the device. 2. The tape shall be placed in rolls without folding. If it is stored for too long, it shall be turned over once a quarter. Teflon
Published on: March 31, 2018 Clicks: 228
-
Teflon high temperature drying mesh belt is breathable. Teflon mesh belt is easily breathable, so it is widely used in textile printing and dyeing, Teflon mesh belt, printing drying guide belt, screen printing, UV drying UV series, light curing machine, offset printing machine, Teflon high-temperature cloth, loose dryer, non-woven drying machine, high frequency dryer, food baking machine guide belt, temperature controlled drying room
Published on: November 6, 2021-11 Number of hits: 185
-
Understand the performance of Teflon high temperature tape. The utilization rate of Teflon high temperature tape is directly related to the service life of Teflon high temperature tape. If properly used and maintained, the utilization rate of Teflon high-temperature tape must be high. Teflon high-temperature tape is characterized by high temperature resistance and wear resistance. Some customers can use it for a long time, but some customers use it for a long time
Published on: March 2, 2020 Number of hits: 72
-
What factors affect the price of Teflon high temperature cloth UHMWPE? With the rapid improvement of production level, UHMWPE is favored by manufacturers because of its wide application prospects. What manufacturers value most when purchasing UHMWPE must be the price. What factors affect the price of UHMWPE? Taizhou Xingfu High Score
Published on: February 28, 2020 Number of hits: 55
-
What are the main performance characteristics of Teflon high-temperature tape? 1. It is used between low temperature - 196 ℃ and high temperature 350 ℃, with weather resistance, //www.txtefulong.com Anti aging. After practical application, if it is kept at 250 ℃ for 200 days, not only the strength will not be reduced, but also the weight will not be reduced; At 35
Published on: March 14, 2020 Number of hits: 99
-
Teflon high temperature drying mesh belt features: 1. Temperature resistance - from low temperature - 140 ℃ to high temperature 260 ℃. 2. Air permeability - air permeability of conveyor belt, reduce heat consumption and improve drying efficiency. Teflon conveyor belt 3. Anti adhesion - it can easily remove almost all adhesive substances such as resin, paint, chemicals, etc. Teflon conveyor belt 4. Good corrosion resistance and various strong resistance
Published on: March 31, 2018 Clicks: 82
-
Is Teflon conveyor belt Teflon mesh belt? First, let's make a conclusion: Teflon mesh belt is a Teflon conveyor belt, and Teflon conveyor belt is not just a Teflon mesh belt. Teflon conveyor belt is also called Teflon conveyor belt, Teflon conveyor belt PTFE conveyor belt and high-temperature resistant conveyor belt. Teflon conveyor belt is divided into Teflon mesh conveyor belt and Teflon high-temperature cloth, both of which are made of glass
Published on: February 27, 2020 Clicks: 51
-
Advantages and methods of pasting Teflon high temperature tape on the yarn size roller Teflon high temperature tape pasting yarn size roller has replaced the traditional Teflon spraying, which has the characteristics of convenience, low technical requirements, durability, etc. To make the service life of Teflon tape pasting roller longer, pay attention to the following technical points:
Published on: February 28, 2020 Number of hits: 48
-
The causes and solutions of the deviation of Teflon high-temperature belt The deviation of Teflon belt is one of the most common faults when the conveyor with Teflon belt is running. There are many reasons for the deviation. The main reasons are low installation accuracy and poor daily maintenance. Here are some common reasons and solutions, For reference of conveyor maintenance personnel using Teflon conveyor belt
Published on: March 31, 2018 Clicks: 213
-
Research, development and application of Teflon glass fiber sintered high temperature resistant filter material Abstract: This paper briefly analyzes the process characteristics of Teflon glass fiber sintered high temperature resistant filter material, introduces the performance, characteristics and engineering application examples of this filter material, and indicates that Teflon glass fiber sintered high temperature resistant filter material is a high-performance filter material with high temperature resistance, high humidity resistance, and chemical corrosion resistance, and has broad application prospects. Teflon conveyor belt
Published on: March 31, 2018 Clicks: 529
-
The manufacturer of high temperature resistant conveyor belt said how to clean the Teflon high temperature cloth belt stained with paint? Teflon high-temperature cloth belt is often polluted by one kind of articles in use, and paint pollution is a common situation. So, what method can be used to clean the Teflon mesh belt after it is stained with paint? Listen to me. The main components of Teflon conveyor belt paint are oil, resin
Published on: November 6, 2021-10 Clicks: 188
-
Teflon, as the most resistant material of plastic, has been limited to chemical corrosion prevention and field pipeline corrosion prevention. (The competition in Teflon high-temperature cloth industry is fierce) Teflon here refers to pure Teflon plate or lining. Today, the manufacturer of high-temperature resistant conveyor belt also introduces a Teflon composite material. Now, it has initially communicated with the internal anti-corrosion of the chemical industry
Published on: February 10, 2023 Clicks: 96
-
Nowadays, the consumption of Teflon high temperature tape is increasing in cities and even in rural areas. Even many hardware stores have Teflon tape. Teflon tape can be seen in the packaging industry of food and daily necessities. Teflon conveyor belt Teflon tape is a special material made of glass fiber and coated with polytetrafluoroethylene
Published on: March 2, 2020 Number of hits: 67
-
Teflon high temperature drying mesh belt is widely used. Suzhou Tuoyang New Material Technology Co., Ltd. said that dryer mesh belt, sterilizer mesh belt, annealing furnace mesh belt, fryer mesh belt, sintering furnace mesh belt, instant noodle steamer mesh belt, etc. are all common application fields of Teflon mesh belt. All production should have a regular system. Today, Suzhou Tuoyang New Material Technology Co., Ltd
Published on: February 26, 2020 Number of hits: 65
-
Is Teflon high temperature tape harmful to human body? To discuss the harm of Teflon high temperature tape to human body, we should first say why we should discuss this problem: a few days ago, there was a saying that the non stick pan caused cancer, because the non stick pan was coated with Teflon, so it is necessary to discuss the harm of Teflon tape to human body. To discuss the harm of Teflon tape to human body, first analyze
Published on: March 31, 2018 Number of hits: 256
